PT-2022 Parts
7000# Galvanized Tie Plate for 2" Square Axle Tubing
$9.99
Brand Com-Fab
General
7000# Galvanized Axle Tie Plate w/ 4.49" x 3.5" Dimensions for 2" Tubing and 1.75" Spring Width
This item is part of the 7000# Galvanized Tie Plate Kit used to mount 3-Leaf Double Eye Springs on to 3500 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles.
TIE DOWN MODEL: 44849DG
MODEL: CFAXLE-TIEPLATE(7000-G)
Specifications
Axle Size: 2" x 2" Square Axle
U-Bolt Size: 1/2"-13 x 2.06" x 4.31"
Dimensions: 4.49" x 3.5"
Tube Width: 2"
Spring Width: 1-3/4"
Hole Diameter: 9/16"
U-Bolt Finish: Galvanized
Plate Finish: Galvanized
Used on
3/8" Black Cable Clamp for Brake Lines
$0.99
Brand Com-Fab
General
3/8" Black Cable Clamp for Brake Lines
This item is secured onto the axle w/ use of a 12 x 3/4″ Zinc Hex Washer Head Tek#3 Screw. The item is used for securing all brake lines to axles on Pontoon Boat Trailer models w/ Brakes.
MODEL: CFBRKECBLCLAMP
Used on
1/2" x 2-5/8" Disc Brake Caliper Slider Pin
$7.99
Brand Com-Fab
General
Tie Down 1/2" x 2-5/8" Disc Brake Caliper Slider Pin
This item is used for mounting a Tie Down caliper to a 9.6" vented rotor. Stainless steel caliper slide pins are easily accessible with hex heads for quick removal. It allows the caliper to float freely and insures proper alignment during installation. It fits all vented rotor calipers.
TIE DOWN MODEL: 44676G
MODEL: CFAXLE-PIN(SLIDER)
Used on
Flat Pontoon Bunk Bracket #44879
$29.99
Brand Com-Fab
General
Flat Pontoon Bunk Bracket #44879
This bunk bracket is optional for all Pontoon Boat Trailer models.
TIE DOWN MODEL: #44879
MODEL: CFBRKTPTBUNK(FLAT-TALL)
Specifications
Length: 9.02"
Base Length: 8.38"
Width: 3"
Height: 5.25"
Optional for
Heavy Duty Pontoon Bunk Bracket #43747
$35.00
Brand Com-Fab
General
Heavy Duty Pontoon Bunk Bracket #43747
This item is optional for all Pontoon Boat Trailer models. It fits 2' x 4' and 2' x 6' boards.
TIE DOWN MODEL: #43747
MODEL: CFBRKTPTBUNK(HVY)
Specifications
Length: 15.4"
Base Length: 13.13"
Width: 3"
Height: 6.07"
Optional for
20′ Winch Strap w/ 1" Hook (4000 lb Max Capacity) - Dutton-Lainson
$27.50
Brand Com-Fab
General
20′ Winch Strap w/ Hook (4000 lb Max Capacity)
- Dutton-Lainson black heavy duty winch strap and hook
- For winches up to 2,600 lb. capacity
- 2" wide x 20' long
- 4,000 lb. breaking strength
- Snap Hook has a tensile strength of 7,500 lbs.
- Includes a 3/8" x 3" bolt, a 3/8" x 3-1/4" bolt, and a 3/8" locknut to install strap onto winch drum
MODEL: CFWNCHSTRAP-20FT(4K-DL)
Used on
PT-16189/16"-18 x 3" Shackle Bolt
$7.99
Brand Com-Fab
General
9/16"-18 x 3" Shackle Bolt
- This item is part of the Pontoon Boat Trailer Single Axle Mounting Kit used to mount 3500 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles to all Single Axle Pontoon Boat Trailer models.
- This item is part of the Pontoon Boat Trailer Tandem Axle Mounting Kit used to mount two 3500 lb Hydraulic Disc Brake Trailer Axles, or 2900 lb Idler Trailer Axles to all Tandem Axle Pontoon Boat Trailer models.
MODEL: CFAXLE-BLT(SHACKLE-Z)
Used on
Dry Launch Amber Side Marker Light w/ 10" of Wire
$9.99
Brand Com-Fab
General
Dry Launch Amber Side Marker Light w/ 10" of Wire
This item is a Dry Launch 203 Series with a snap out bulb slide. You can change the bulb without tools, and mount it with a single stud. It can be used as a Side Marker Light for the tongue of all Pontoon Boat Trailer models.
MODEL: CFLIGHTSDMRKR-10
Optional for
Dry Launch 60″ Red Triple Light Bar
$11.25
Brand Com-Fab
General
Dry Launch 60″ Red Triple Light Bar
This light bar can be mounted to all Double PWT, and Pontoon Boat Trailer models. It is secured with two 12 x 3/4″ Zinc Hex Washer Head Tek #3 Screws.
MODEL: CFLIGHTBAR-60
Optional for
3/8″-16 x 2.06″ x 5.25″ Zinc U-Bolt
$5.99
Brand Com-Fab
General
3/8″-16 x 2.06″ x 5.25″ Zinc U-Bolt
This item is used with a 4" x 1" x .25" Galvanized Flat Plates w/ 1/2" Holes, and a 3/8"-16 Serrated Zinc Flange Nuts to mount Pontoon Boat Trailer Bunk Brackets onto all Pontoon Boat Trailer models.
See: Tall Galvanized Pontoon Boat Trailer Bunk Bracket Kit
MODEL: CFUBLT3/8X2.06X5.25Z
Used on
3.75" x 1.25" x .25" Zinc Steel Shackle Link w/ 9/16" Holes - Replacement Standard Shackle Link
$3.99
Brand Com-Fab
General
3.75" x 1.25" x .25" Zinc Steel Shackle Link w/ 9/16" Holes - Replacement Standard Shackle Link
These are used to mount 2900 lb Idler Trailer Axles, or 3500 lb Hydraulic Disc Brake Trailer Axles to frames on all Single and Tandem Axle setups for Pontoon Boat trailers, and are frequently used in conjunction with axle equalizers.
Pontoon Boat Trailer Single Axle Mounting Kit
Pontoon Boat Trailer Tandem Axle Mounting Kit
TIE DOWN MODEL: #44536
MODEL: CFAXLELINK(Z)
Used on
84″ Grey Flex Hose Banjo-Banjo Brake Line - Dexter
$60.00
Brand Com-Fab
General
84″ Grey Flex Hose Banjo-Banjo Brake Line - Dexter
This item is used to connect two Aluminum E-Coat Caliper Assemblies on Tandem Axle Pontoon Boat Trailers.
MODEL: CFBRKELINE-84BB(GREY)
Used on
M10 Copper Banjo Brake Fitting Washer
$1.49
Brand Com-Fab
General
Copper Banjo Brake Fitting Washer
This item is used in conjunction with 64" Grey Flex Hose Banjo-Banjo Brake Lines, Brass Banjo Fitting Bolts, and Black O-Rings to connect Aluminum E-Coat Caliber Assemblies on all tandem axle pontoon trailer models.
For use with:
– 64″ Grey Flex Hose Banjo-Banjo Brake Lines
– Brass Banjo Fitting Bolts
– Black O-Rings
MODEL: CFBRKE-WSHRBANJO
Used on
3/8″-16 x 4.19″ x 3″ Galvanized U-Bolt
$5.99
Brand Com-Fab
General
3/8″-16 x 4.19″ x 3″ Galvanized U-Bolt
This item is part of the 2213G - Fender Mounting Kit used to mount fenders to PWT-2213G, PWT-2214G, and all Pontoon Boat Trailer models.
MODEL: CFUBLT3/8X3.00G
Used on
Tandem Axle Galvanized Pontoon Boat Trailer Fender with Welded-On Spring Hangers
$189.99
Brand Com-Fab
General
Tandem Axle Galvanized Pontoon Boat Trailer Fender with Welded-On Spring Hangers
This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340
- This item is mounted to Pontoon Boat Trailer frames with a Pontoon Boat Trailer Tandem Axle Fender Mounting Kit, and it typically uses an ST175/80D13 C Load Range 13″ Galvanized Tire & Wheel.
- The hangers welded to bottom are for mounting two 2900 lb Idler Trailer Axles, or two 3500 lb Hydraulic Disc Brake Trailer Axles with a Pontoon Boat Trailer Tandem Axle Mounting Kit.
MODEL: CFFNDRPT(TA-G)
Used on
2900 lb Galvanized PWC Idler Trailer Axle w/ 545 Hubs and Springs HF 87 SC 74
$425.00
Brand Com-Fab
General
2900 lb Galvanized Idler Trailer Axle w/ 545 Hubs and Springs
*This item is not shipped! Pickup only from our location at 2375 Pleasantdale Rd. Atlanta, GA 30340*
*NOTE: if your trailer is older than 2006, call before ordering to ensure you receive the correct axle.*
Materials Include:
1 - 80.375" x 2" x 2" x .17" Gauge Galvanized Axle Tubing
2 - Galvanized 5-Bolt Hub Assembly
2 - 3-Leaf Double Eye Springs (1850 lb)
1 - 7000# Galvanized Tie Plate Kit
- This item is used on all Tandem, and Single Axle Non-Brake Setup Pontoon Boat Trailers.
- It can be mounted to a Single Axle Pontoon Boat Trailer Fender with a Pontoon Boat Trailer Single Axle Mounting Kit.
- Two of them can be mounted to Tandem Axle Pontoon Boat Trailer Fenders with a Pontoon Boat Trailer Tandem Axle Mounting Kit
**Some states require brakes on all axles and/or wheels. please refer to local laws when placing your order. it is up to the individual dealer to stay within the guidelines as set by the legal authorities.
MODEL: CFAXLE2900G(IDLER)
Specifications
Tubing: 2" Galvanized Square Axle
Load Rating: 2900 lb
Hub Face: 87"
Spring Center: 74"
Overall Length: 92"
Bearing Size: 1-3/8" x 1-1/16"
Optional for
Galvanized Axle Equalizer
$29.99
Brand Com-Fab
General
Axle Equalizer
Two of these axle equalizers are part of the Pontoon Boat Trailer Tandem Axle Mounting Kit used to mount 3-Leaf Double Eye Springs to frames on all Tandem Axle Setups for Pontoon Boat Trailers
MODEL: CFAXLE-EQUALIZER
Used on
Galvanized Side Mount Spare Tire Carrier
$49.99 $45.75
Brand Com-Fab
General
Galvanized Side Mount Spare Tire Carrier
- This item is optional for all of our Galvanized Trailer models.
- It can accommodate wheels from 10" to 16.5" with a spare tire.
- It fits all 4 and 5 lug wheels with 4" and 4.5" diameter hole patterns.
- The galvanized finish provides long lasting protection.
- The item can mount to trailer frames up to 3" wide and 4" high.
*Used on Galvanized Trailer Models Only
TIEDOWN MODEL: #86098
MODEL: CFSTB-SIDE(G)
Installation Instructions
1. Using the spare tire carrier and spare tire as a guide, determine a suitable mounting location on trailer frame.
2. Slide U-bolt around the frame and through the holes in tire carrier.
3. Mount with flat washers, lock washers and nuts provided.
4. Using the spare tire to determine the correct holes to use, place the carriage bolts provided for mounting the spare tire in the holes of the rectangular plate. Bolt heads should be on the back side of the tire carrier. Secure bolts with “star” washers.
5. The mounting plate will accommodate several sizes of frames by using the various hole patterns.
6. Check position of the tire mount for proper clearance with the spare tire before tightening bolts.
7. Mount spare tire with 1/2" bolt, washers and hex nuts provided.
Optional for
ALL GALVANIZED TRAILER MODELS
Square Tubing Plug for 2" Square Tubing (10-14GA)
$5.99 $1.25
Brand Com-Fab
General
2x2 Square Tubing Plug for 10-14 GA
This item is used on Pontoon Winch Stands & Canoe/Kayak Crossbars and Uprights. It may also be used in other applications utilizing 2" square tubing.
This item is part of these kits:
MODEL: CFCAP-2X2(10-14GA)
Used On
PT-1820
PT-2022
PT-2224
PT-2426
Rectangular Tubing Plug for 4"x2" Tubing (10-14GA)
$7.99 $3.25
Brand Com-Fab
General
2x4 Rectangular Tubing Plug for 10-14 GA
This item is used on Pontoon Winch Stands and as End Caps to the 2x4 Tubing of Pontoon Trailers.
MODEL: CFCAP-2X4(10-14GA)
Used On
PT-1820
PT-2022
PT-2224
PT-2426
64″ Grey Flex Hose Banjo-Banjo Brake Line - Dexter
$55.00
Brand Com-Fab
General
64″ Grey Flex Hose Banjo-Banjo Brake Line - Dexter
This item is used to connect two Aluminum E-Coat Caliper Assemblies on Tandem Axle Pontoon Boat Trailer models.
For use with:
Used on
Weld Aid B-100 Brite Zinc Aerosol Spray Can
$14.99
Brand Com-Fab
General
Weld Aid B-100 Brite Zinc Aerosol Spray Can
This product is used to touch up, and prevent rust and corrosion on all of our galvanized items for sale. The spray is 69% Zinc Metal ensuring that it matches the shine of any and all Hot-Dipped Galvanized Steel. It has a special no clog nozzle, and can cover up to 40 sq feet of steel. This item meets ASTM-A780 requirements for corrosion protection.
Read the Safety Instructions carefully before use of this item.
https://weldaid.com/wp-content/uploads/2018/11/1008302E.pdf
Specifications
Part No: B-100
UPC: 731592100013
Volume: 12.5 oz Primer
Model: CFGALVSPRAY
Used On
PWT-2213G
PWT-2214G
JBT-900
JBT-1600
PT-1400 MiniToon
PT-1618
PT-1820
PT-2022
PT-2224
PT-2426
TecNiq-S14 Red LED Mini PC Side Marker Light with 24" Lead
$7.99 $5.00
Brand Com-Fab
General
TecNiq-R24 Red LED Mini PC Side Marker Light with 24" Lead
- Comes with a 1/4" Nut.
- Brilliant illumination in a compact size
- IP 68 Rated - Dust and water proof
- TecSeal Urethane Potting - Guaranteed Circuit Board Protection
- Stud-mounted, no visible fasteners
- Reliable performance over 100,000 hours
- Vertical mount positions meets P2 specifications, while horizontal mount meets PC specifications
TecNiq Part No. S14-RRS1-1
MODEL: CFLIGHTSDMRKR-LED(TEC-R24)
Used on
TecNiq Red Low Profile ID Light Bar w/ Ground Terminal
$19.99 $10.50
Brand Com-Fab
General
Red Low Profile ID Light Bar w/ Ground Terminal
- Used on all Pontoon Trailer models
- Screws included with purchase
- Meets all FMVSS 108 requirements for wide and narrow vehicles
- IP68 Rated - Dust and water proof with hermetic seal
- TecSeal Urethane Potting - Guaranteed Circuit Board Protection
- Durable impact resistant lens
- Excellent UV Resistance - Automotive exterior lighting grade polycarbonate
- Reliable performance over 100,000 hours
- Can be mounted horizontal, vertical, or at any angle
TecNiq Model No. T10-RR00-1
MODEL: CFLIGHTBAR-LED(S-TEC)